The CURATOR® patient lift is a flexible wall hoist.

it can be used both stationary &
mobile in the room

CURATOR patient lift is a flexible wall hoist
$

curator.walllift

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

For patients in need of care, it is important to be able to transport them gently and safely from one place to another and over any obstacles. aacurat has an intelligent, space-saving product for you for this purpose.

The construction is easy to install with individual mounting options on the wall or freely in the room. The CURATOR WandLift is stationary and yet mobile.

By simply unhooking and rehooking, the WandLift can be used in all rooms where wall brackets are fitted. Wheels and castors make it easy to transport.

The CURATOR patient lift from aacurat is made of high-quality corrosion-free materials which ensures a long service life. In addition, the CURATOR is highly lightweight. After lifting the person, the processes of turning, swivelling, lifting and setting down are possible with only one hand! For this purpose, the control buttons are simply integrated into the carrying handle by means of a new handle design.

CURATOR can be used wherever it is needed in everyday life.

CURATOR dimensions ...
 

Electric hanging scale …

Article no. 8235002

  • complete with suspension and handle
  • Display in 500 g increments
  • Load capacity up to 140 kg
  • can be tared (can be set to 0)
  • Battery operation
  • Remote control

Article no. 8245600

  • Hand switch with 1.5 m spiral cable

curator.accessories

CURATOR

curator.wallmounts

Article no. 8267201

For solid masonry:
Solid brick, solid stone, lightweight concrete, natural stone, solid pumice (concrete B25).

For hollow masonry:
vertically perforated brick, sand-lime perforated brick, lightweight concrete compl. with compound mortar and screws

Possible spacers: all DZ-P

Article no. 8223701
For solid masonry concrete B25 compl. with dowels

Possible spacers: all DZ

Article no. 8267301
Wall bracket set WHS-80-E CURATOR one wall side

Article no. 8267401
Wall bracket set WHS-80-B CURATOR on both sides of the wall for post construction / drywall plasterboard (e. g., Rigips), double-clad on both sides

Screw-through installation for wall thicknesses up to a maximum of 21.5 cm

Possible spacers: all DZ-P
Different distances from the wall can be easily bridged with appropriate spacers.

  • Article no. 8233601 DZ 10 x 165 mm 
  • Article no. 8233701 DZ 20 x 165 mm 
  • Article no. 8233801 DZ 40 x 230 mm 
  • Article no. 8233901 DZ 80 x 230 mm 
  • Article no. 8206901 DZ 100 x 270 mm

More spacers on request.

 

Article no. 8267201

For solid masonry:
Solid brick, solid stone, lightweight concrete, natural stone, solid pumice (concrete B25).

For hollow masonry:
vertically perforated brick, sand-lime perforated brick, lightweight concrete compl. with compound mortar and screws

Possible spacers: all DZ-P

 

 

Article no. 8223701
For solid masonry concrete B25 compl. with dowels

Possible spacers: all DZ

 

 

Article no. 8267301
Wall bracket set WHS-80-E CURATOR one wall side

Article no. 8267401
Wall bracket set WHS-80-B CURATOR on both sides of the wall for post construction / drywall plasterboard (e. g., Rigips), double-clad on both sides

Screw-through installation for wall thicknesses up to a maximum of 21.5 cm

Possible spacers: all DZ-P

 

 

Different distances from the wall can be easily bridged with appropriate spacers.

  • Article no. 8233601 DZ 10 x 165 mm 
  • Article no. 8233701 DZ 20 x 165 mm 
  • Article no. 8233801 DZ 40 x 230 mm 
  • Article no. 8233901 DZ 80 x 230 mm 
  • Article no. 8206901 DZ 100 x 270 mm

More spacers on request.

 

curator.wallindependent

Article no. 8239601 

The stable free-standing stand is attached to the floor.

The Curator can be removed and repositioned in a few easy steps, just like on the wall.

Complete with compound mortar and screws.

Article no. 8269802 

The floor-wall support is mounted on the floor and on the wall. Is particularly suitable where larger obstacles (e. g., radiators) prevent direct attachment to the wall.

Article no. 8234301 

The floor-ceiling support for wall-independent installation is simply clamped between floor and ceiling.

Article no. 8236000 

For installation in drywall stud walls. Fastening to floor and ceiling. Made of galvanised steel and BIMP wooden plate. For attaching wall bracket set WHS-TS compl. with fixing material (without WHS-TS).

 

Article no. 8239601 

The stable free-standing stand is attached to the floor.

The Curator can be removed and repositioned in a few easy steps, just like on the wall.

Complete with compound mortar and screws.

 

 

Article no. 8269802 

The floor-wall support is mounted on the floor and on the wall. Is particularly suitable where larger obstacles (e. g., radiators) prevent direct attachment to the wall.

 

 

Article no. 8234301 

The floor-ceiling support for wall-independent installation is simply clamped between floor and ceiling.

 

 

Article no. 8236000 

For installation in drywall stud walls. Fastening to floor and ceiling. Made of galvanised steel and BIMP wooden plate. For attaching wall bracket set WHS-TS compl. with fixing material (without WHS-TS).

 

curator.technical data

CURATOR wall hoist
Article no. 8235001

  • Load capacity: 140 kg
  • Lifting speed: approx. 20 mm/s
  • Drive: electric motor 230 V / 50 Hz; 180 W; 0,8 A
  • Duty cycle: 1 min. / 9 min.
  • Protection class: IP 56
  • Electrical connection: 3.5 m cable to power socket
  • Control: pneumatic buttons integrated in handle
  • Material: stainless steel or aluminium
  • Carrying means: wear-resistant belt strap
  • Surface finish: powder coating
  • Colour: pure white RAL 9010
  • Weight: approx. 20 kg
  • Mechanical emergency release
  • Made in Germany